|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ICs for Audio Common Use AN7125 Dual Channel BTL Power Amplifier s Overview AN7125 is a monolithic integrated circuit designed for 13.5 W (12 V,4 ) output audio power amplifier.It is a dual channel BTL IC suitable for stereo operation in radio cassette and TV application. 29.750.30 28.00.3 20.00.3 7.70.3 Unit : mm 12 (10.0) 3.6 (1.27) (1.3) * Built-in muting pin * Built-in stand by pin * Built-in thermal shutdown protection circuit * Built-in current limiting circuit * High power : (13.5 W/12 V/4 ) (13.0 W/15 V/8 ) * Few external components * Operating voltage range 6 V 18 V (12 V typ.) R1.8 0.6 +0.10 0.25 -0.05 2.54 1 0.6 -0.05 (1.27) (10.0) s Features +0.15 (12.5) 1.450.15 1.20.1 (1.2) 19.10.3 21.90.3 HSIP012-P-0000A s Applications * Radio-cassette s Block Diagram REF TSD protection circuit Standby circuit Mute 10 11 GND GND GND VCC 12 1 2 3 4 5 6 7 8 9 1.800.15 3.50.3 29.60.3 1 AN7125 s Pin Descriptions Pin No. 1 2 3 4 5 6 VCC ch.1 + ve Phase Output ch.1 Output GND ch.1-ve Phase Output Standby ch.1 Input Description Pin No. 7 8 9 10 11 12 ICs for Audio Common Use Description Pre GND ch.2 Input Mute ch.2 -ve Phase Output ch.2 Output GND ch.2 +ve Phase Output s Absolute Maximum Ratings Parameter Supply voltage Supply current Power dissipation *2 *1 Symbol VCC ICC PD Topr Tstg Ratings 24 6.0 38.5 -25 to +75 -55 to +150 Unit V A W C C Operating ambient temperature Storage temperature Note) *1 : Without input signal,VCC is up to 24 V *2 : Ta = 75 C. s Recommended Operating Range Parameter Supply voltage Symbol VCC Range 6.0 to 18.0 Unit V s Electrical Caracteristics at VCC = 12 V, RL = 4 , freq. = 1 kHz, 2 channel outputs, Ta = 25 C Parameter Quiescent circuit current Output noise voltage Voltage gain Total harmonic distortion Maximum output power Channel balance Channel crosstalk *2 *2 *1 Symbol ICQ VNO GVC THD PO CB CT VOFF RR ISTB MT VIN = 0 mV Conditions VIN = 0 mV,RG = 6.2 k VIN = 20 mV VIN = 20 mV THD = 10 % VIN = 20 mV VIN = 20 mV,RG = 6.2 k RG = 6.2 k VR = 1 Vrms,fR = 120 Hz,RG = 6.2 k VIN = 0 mV VIN = 20 mV Min 38 10 -1 55 -350 50 70 Typ 100 0.27 40 0.07 12 0 70 0 60 1 80 Max 210 0.5 42 0.4 1 350 10 Unit mA mVrms dB % W dB dB mV dB A dB Output offset voltage Ripple rejection Standby current Muting effects *2 *1 Note) *1 : With a filter band 20 Hz to 20 kHz(12 dB/OCT)used. *2 : With a filter band 400 Hz to 30 kHz used. 2 ICs for Audio Common Use s Terminal Equivalent Circuit Pin No. 1 2 Equivalent Circuit VCC : VCC input 1 ch.1 O/P : ch.1 positive phase output pin. 3 Pin2 4 ch.1 Power GND : ch.1 output power ground pin. 4 600 VCC/2 5 1 5 100 100 30 k AN7125 Function Status typ. : 12 V VCC/2 0V 30 k 3 ch.1 O/P : ch.1 inverse phase output pin. Standby : This is the standby control pin. STB off > 3.5 V STB on = 0 V/GND VCC/2 VTH = 2.8 V 5 k 5 k 10 k 2 k 2 k 8 6 200 Pin6,8 30 k 400 ch.1 Input : This is the amplifier input pin. 0V 7 7 Pre GND : Input ground pin. 0V 3 AN7125 s Terminal Equivalent Circuit(continued) Pin No. 8 200 Pin6,8 30 k 400 ICs for Audio Common Use Equivalent Circuit ch.2 Input : Function Status 0V This is the amplifier input pin. 7 9 Mute : Mute input pin. Mute on > 2.5 V 3.2 k 9 3.6 k VTH = 1.5 V Mute off = 0 V 7 20 k 1 10 ch.2 Output : ch.2 inverse phase output pin VCC/2 11 Pin10 12 ch.2 Power GND : ch.2 output power ground 0V 12 600 VCC/2 30 k 11 ch.2 Output : ch.2 positive phase output pin VCC/2 4 ICs for Audio Common Use s Application Circuit Example Input 7 GND VCC 2200 F AN7125 VCC 12 V 1 2 IN1 6 OUT1 0.22 F 2.2 RL 4 Output1 3 GND 4 OUT1 51 k 5V STB Cs 5 10 F 0.22 F 2.2 8.2 k MUTE Cs 9 33 F 10 11 12 OUT2 Output2 GND OUT2 0.22 F 2.2 0.22 F 2.2 RL 4 IN2 8 STB 'Off' STB 'On' Mute 'Off' Mute 'On' 5V 0V 0V 5V s Application s Precautions 1. External heatsink is needed when used. External heatsink should be fixed to the chassis. 2. Fin of the IC can be connected to GND. 3. Please prevent output to VCC short and output to GND short. 4. The temperature protection circuit will operate at Tj around 150 C. However, if temperature decrease, the protection circuit will automatically be decreased and resume normal operation. 5 AN7125 s Technical Information * HSIP012-P-0000A PD Ta ICs for Audio Common Use 80 70 Power dissipation PD (W) 62.5 W 60 50 40 30 20.8 W 20 15.6 W 10 3.0 W 0 0 25 50 75 100 125 150 (4) (2) (3) (1) Ambient temperature Ta (C) 1. TC = Ta,62.5 W (j-c = 2 C/W) 2. 20.83 W (f = 4.0 C/W) With a 100 cm2 X 3 mm Al heat sink (black colour coated) or a 200 cm2 X 2 mm Al heat sink (not lacquered) 3. 15.63 W (f = 6.0 C/W) With a 100 cm2 X 2 mm Al heat sink (not lacquered) 4. 3.0 W at Ta = 25 C(j-a = 42 C/W) Without heat sink * Area of safe operation VCEmax = 30 V ICmax = 8 A 10 t = 0.2 ms t = 1.0 ms 2 t = 10 ms 1 5 IC (A) 0.5 0.2 0.1 1 2 5 10 20 50 100 VCE (V) 6 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of AN7125 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |